Molten3D TIG welding DIY metal 3d printer by Steve Delaire

Here is new DIY 3d metal printer based on a TIG welding  (Tungsten Inert Gas) process created by Steve Delaire. It is still under development but the project is very interesting as is any attempt to make homemade fully functional metal 3d printer.





It uses cheep standard MIG steel wire you can buy anywhere, it maybe even cheaper then the plastic filament.

The output objects are still very rough shapes but the technology is advancing. TIG molten wire is more similar to water then molten plastics, it creates beads so continuous fine layers are much harder to achieve.

Print results from Steves blog. Still very basic but I'm sure he will improve it. 

Project homepage with much more information:

http://molten3d.blogspot.com/


We have seen similar concept based on MIG welder and inverse Delta kinematics:

http://diy3dprinting.blogspot.com/2014/02/open-source-diy-metal-3d-printer-made.html

Read More

Open source DIY metal 3d printer made with MIG welder

This is important step forward for the entire field: open source sub 1500 USD metal printer. It can be mad by anyone with some experience. It is based on static MIG welder and moving invert delta 3d printer platform as build bed.

Project was developed by Michigan Tech's Open Sustainability Technology Lab: Gerald C. Anzalone, Chenlong Zhang, Bas Wijnen, Paul G. Sanders and Joshua M. Pearce. Kudos to you gentlemen!


From project abstract:

Technical progress in the open-source self replicating rapid prototyper (RepRap) community has enabled a distributed form of additive manufacturing to expand rapidly using polymer-based materials. However, the lack of an open-source metal alternative and the high capital costs and slow throughput of proprietary commercialized metal 3-D printers has severely restricted their deployment. The applications of commercialized metal 3-D printers are limited to only rapid prototyping and expensive finished products. This severely restricts the access of the technology for small and medium enterprises, the developing world and for use in laboratories. This paper reports on the development of a <$2000 open-source metal 3-D printer. The metal 3-D printer is controlled with an open-source micro-controller and is a combination of a low-cost commercial gas-metal arc welder and a derivative of the Rostock, a deltabot RepRap. The bill of materials, electrical and mechanical design schematics, and basic construction and operating procedures are provided. A preliminary technical analysis of the properties of the 3-D printer and the resultant steel products are performed. The results of printing customized functional metal parts are discussed and conclusions are drawn about the potential for the technology and the future work necessary for the mass distribution of this technology.

Project homepage with detailed build instructions:

http://www.appropedia.org/Open-source_metal_3-D_printer

Academia paper on this printer:

https://www.academia.edu/5327317/A_Low-Cost_Open-Source_Metal_3-D_Printer

If you want to learn more about MIG (metal inert gas) welding:

http://en.wikipedia.org/wiki/Gas_metal_arc_welding

There is another welder based DIY metal 3d printer project with almost no documentation - The Chipfuzer:

http://diy3dprinting.blogspot.com/2013/11/chipfuzer-diy-3d-metal-printer-by-mark.html

Update (19.6.2014.):

New TIG welder based metal printer:

http://diy3dprinting.blogspot.com/2014/06/tig-welding-diy-metal-3d-printer-by.html

Read More