,cnc machinist,cnc manufacturing,cnc mechanic,cnc mill,cnc milling center,cnc milling companies,cnc milling tools,cnc parts,cnc plasma cutter,cnc plasma cutting,cnc plasma table,cnc production,cnc router table,cnc screw machine,cnc service,cnc swiss,cnc turning,cnc turning center,cnc turning centers,cnc vertical lathe,horizontal cnc,how to cnc machine,machining cnc,manufacturing cnc machines,okuma cnc,plasma cnc machine,production cnc machining,troubleshooting cnc machines,used cnc machine tools,used cnc milling machines,vertical cnc lathe,what can a cnc machine make
A brief overview of the machine, including the inside of the electrical cabinet and the finished pump/air solenoid cabinet, followed by some images of the first part being machined.
This part was cut using a 12 mm DOC, 1 mm stepover, and 1400 mm/min. The feed rate was found to be too slow, as the machine seemed to be operating normally. Therefore, the feed rate was adjusted to approximately 2000 mm/min. It should have been faster, but I think I'll wait until at least one part is finished before I break anything. ;-)
-----------------------------------------------------------