,cnc machinist,cnc manufacturing,cnc mechanic,cnc mill,cnc milling center,cnc milling companies,cnc milling tools,cnc parts,cnc plasma cutter,cnc plasma cutting,cnc plasma table,cnc production,cnc router table,cnc screw machine,cnc service,cnc swiss,cnc turning,cnc turning center,cnc turning centers,cnc vertical lathe,horizontal cnc,how to cnc machine,machining cnc,manufacturing cnc machines,okuma cnc,plasma cnc machine,production cnc machining,troubleshooting cnc machines,used cnc machine tools,used cnc milling machines,vertical cnc lathe,what can a cnc machine make
Spiral interpolation G02.1 G03.1
Command G02.1 and G03.1 provide such an interpolation that the starting and ending points are connected smoothly for an arc command where the radial of the both points difference from each other
1. Circular movement directions of G2.1 and G3.1 correspond with those G02 and G03 respectively.
2. Radius designation is not available for spiral interpolation. The start and end points must lie on the same arc for a radius designation
3. Conical cutting or tapered threading can be done by changing the radial of the arc at its starting and ending points and designating a linear–interpolation axis at the same time.
Notes:-
When a radius is designated, this command will be regarded as a radius designated circular interpolation
Programming Format:-
Plane G17
G17 G2.1 or G3.1 X__ Y__ I__ J__ F__ P__
Plane G18
G18 G2.1 or G3.1 Z__ X__ K__ I__ F__ P__
Plane G19
G19 G2.1 or G3.1 Y__ Z__ J__ K__ F__ P__
Detail:-
X Y or ZX or YZ = Arc end point Coordinates
I J or K L or J K = Arc center coordinates
P : Number of pitches ( P can be Omitted If Equal to 0.)
F : Rate of feed along the tool path
 |
| Spiral Interpolation |
More detail:-
Take care not to use radius designation (R) for spiral interpolation; otherwise a normal circular interpolation will be executed. It is not possible for a spiral interpolation the starting and ending points of which should have different center specified.
Example:-
Programming for spiral contouring with incremental data
Plane G17
Arc end point coordinates
X= 0.0 , Y = -15.0
Arc center coordinates
X= 0.0 , Y = 45.0 and pitch 2.00
Program :-
G00 X0.0 Y-45.0 ( Approach the start point )
G01 Z-0.5 ( in feed on the Z –axis )
G2.1 X0.0 Y-15.0 I0. J45.0 F300 P2. ( Spiral interpolation )
G00 Z3.0 ( Return on the Z axis )
Click Here
Click Here
