,cnc machinist,cnc manufacturing,cnc mechanic,cnc mill,cnc milling center,cnc milling companies,cnc milling tools,cnc parts,cnc plasma cutter,cnc plasma cutting,cnc plasma table,cnc production,cnc router table,cnc screw machine,cnc service,cnc swiss,cnc turning,cnc turning center,cnc turning centers,cnc vertical lathe,horizontal cnc,how to cnc machine,machining cnc,manufacturing cnc machines,okuma cnc,plasma cnc machine,production cnc machining,troubleshooting cnc machines,used cnc machine tools,used cnc milling machines,vertical cnc lathe,what can a cnc machine make
G01 Linear interpolation (Cutting feed)
A tools move along a line to the specified position at the feed rate specified in F.
The feed rate specified in F is effective until a new value is specified. It need not be specified for each block. The feed rate commanded by the F code is measured along the tool path. If the F code is not commanded, the feed rate is regarded as zero.
Function and purpose:-
Command G01 involves use both a coordinate word and a feed rate command. This command moves linearly a tool from the current position to the ending point specified by a coordinates word, at the feed rate specified by address F. the feed rate specified by address F ,however ,acts as the linear velocity to the direction of movement of the tool center .
Notes:-
Once this commend has been given , the G01 mode will be retained until any other G-code commend that overrides this mode ,that is ,either G00,G02,G03,G78,G33,G92 or fixed cycle is given . Thus a coordinate word will only need be given if the text command is also G01, that is, if the feed rate the next block remains the same.
Alarm:-
A programming error will result if an f-code command is not given to the first G01 command.
Example:-
G00 X200.0 Z40.00; ( POSITION )
G01 X100.0 Z-90.0 F300; ( Cutting feed 300 )
Z-100.0 F15.0 ; ( cutting feed 15 )
X140.0 Z-220.0 ; ( same cutting feed )
G00 X200.0 Z40.0 ; ( position )
