,cnc machinist,cnc manufacturing,cnc mechanic,cnc mill,cnc milling center,cnc milling companies,cnc milling tools,cnc parts,cnc plasma cutter,cnc plasma cutting,cnc plasma table,cnc production,cnc router table,cnc screw machine,cnc service,cnc swiss,cnc turning,cnc turning center,cnc turning centers,cnc vertical lathe,horizontal cnc,how to cnc machine,machining cnc,manufacturing cnc machines,okuma cnc,plasma cnc machine,production cnc machining,troubleshooting cnc machines,used cnc machine tools,used cnc milling machines,vertical cnc lathe,what can a cnc machine make
Direct and Bowden extruders both have their limitations and advantages. Flying extruder for Delta 3d printers should have the best of both types.Flying extruder should have few key advantages:
- Remove weight from the moving portion of the printer, making momentum shifts much easier
- Remain “close” to the hot end to enable effective printing of flexible materials and remove tube friction
- Reduce motion “lag” caused by lengthy tube traversals
It was introduced on RepRap forum thread:
http://forums.reprap.org/read.php?178,218716
It was described as:
The extruder is suspended by rubber bands. These are running around several rolls to increase the length (each around 2m relaxed) to have more or less the same force over the whole vertical range. The extruder is connected with a very short latex tube (around 75mm) to the nozzle. This tube decouples the high frequencies between the nozzle and the extruder.
Long story short: I'm printing with no problems with 75m/s and 3mm retraction and still with the same acceleration of 800mm/s². But this was only a short test and I think I can bring it up with a bit optimization.
Another advantage is, that it's now easier to build an enclosure and that the printer is much quieter, because the extruder is decoupled.
Here is a video of flying extruder in action. The developer claims that the strange motion is due to Kisslicer and that prints are very good.
You can find all the files to build it here:
http://www.thingiverse.com/thing:756426
More extensive article:
http://www.fabbaloo.com/blog/2015/11/15/the-flying-extruder-the-best-of-bowden-and-direct-3d-printer-extruders
Looks like it is not developed further, but the design is interesting ...
Does anyone have any experience with it? Let us know in the comments!
