,cnc machinist,cnc manufacturing,cnc mechanic,cnc mill,cnc milling center,cnc milling companies,cnc milling tools,cnc parts,cnc plasma cutter,cnc plasma cutting,cnc plasma table,cnc production,cnc router table,cnc screw machine,cnc service,cnc swiss,cnc turning,cnc turning center,cnc turning centers,cnc vertical lathe,horizontal cnc,how to cnc machine,machining cnc,manufacturing cnc machines,okuma cnc,plasma cnc machine,production cnc machining,troubleshooting cnc machines,used cnc machine tools,used cnc milling machines,vertical cnc lathe,what can a cnc machine make
3DPrintMi combines the minimalistic, open frame style of the Printrbot/Wallace with the fixed Y Gantry system of the Mendel. The printed parts are designed to be produced rapidly, efficiently and assembled easily. A primary goal for this printer was to incorporate the maximum number of printed parts, thus enabling self replication. Built from the ground up, this Reprap requires very little tooling and does not need specially made parts (e.g. lasercut pieces) for it to function. It is also Gada Prize Bronze Medalist.
Technical specifications:
- Printed Parts: 31-35
- Non-Printed Parts: 279 - 281
- Total Cost: $340 - $450
- Material Cost:
- Printed Parts: ?
- Vitamins: $105 - $130
- Electronics: $240 - $315
- Printer Dimensions: 38cm x 43cm x 41cm (15" x 17" x 16")
- Build Area: 152mm x 152mm x 200mm (6" x 6" x 8") or 200mm x 200x x 200mm (8" x 8" x 8")
- Precision: ???
- Accuracy: 0.15mm (current layer height tested)
- Speed: 60mm/s perimeter, 120mm/s infill
- Units of Measurement: Metric
- In compliance with Vertical X Axis Standard, compatible with Mendel style X gantry
- Fully printed Y carriage platform
- Extruder mount compatible with Wade Extruder/Bowden or Direct Drive(QU-BD MBE)
- Adjustable frame allows increased build volume (Working)
- Fully parametric
- 56% Plastic, 44% vitamins (Volume)
- Estimated assembly time = 2 - 3 hours (excludes electronic/board assembly)
- Estimated total print time of a printed set = 28+ hours
- Estimated total plastic usage of a printed set = 370 cc @ 60% infill
- Power requirement = 80W to 100W (Hotend @ 240C, Hotbed @ 95C)
Very detailed building guide:
http://www.instructables.com/id/3DPrintMi-Assembly-Guide/?ALLSTEPS
All the files, BOms etc.:
http://www.thingiverse.com/thing:95339
Project homepage:
http://gyroe3dprinter.blogspot.com/
http://reprap.org/wiki/3DPrintMi
