,cnc machinist,cnc manufacturing,cnc mechanic,cnc mill,cnc milling center,cnc milling companies,cnc milling tools,cnc parts,cnc plasma cutter,cnc plasma cutting,cnc plasma table,cnc production,cnc router table,cnc screw machine,cnc service,cnc swiss,cnc turning,cnc turning center,cnc turning centers,cnc vertical lathe,horizontal cnc,how to cnc machine,machining cnc,manufacturing cnc machines,okuma cnc,plasma cnc machine,production cnc machining,troubleshooting cnc machines,used cnc machine tools,used cnc milling machines,vertical cnc lathe,what can a cnc machine make
Design
The basis of the panel design is a octagon, with rounded edges. Curves were drawn as edges for the surface contours:
Here surfaces have been applied and the edges of the extruded base shape trimmed:
This is a plan view of the resulting form of a single panel. This is prior to deformation by the Rhino Paneling Tools.
The form the panels are applied to began as a simple revolved curve. The Paneling Tools generate a grid of points which govern how the panels are deformed to fit. You can see those points below:
Here is the form as generated on the cylinder by the Paneling Tools:
Because of the symmetry of the form this is composed of only two different panel distortions. These are then hand edited in Rhino to create tabs to join them to the adjacent panel.
Fabrication
A file was generated to load into MasterCAM to drive the 3D contouring of the form. The green lines shown are the edges of the MDF. Two sheets were laminated to give a 1-1/2" thickness.
The molds were cut on the CNC router from "Plum Creek" MDF:
These were then vacuum formed using 1/32" thick PETG plastic:
Here's a single molded panel. At the top of the image you can see the stack of 16"x16" panels:
Each piece had to be cut out by hand. PETG PITA! With more time we should have devised a way to cut them on the router itself.
Here are the sections clamped together during assembly:
Here's the final sculpture - it stands 30" high:
