Mini Kossel Delta configuration DIY 3d printer

Kossel design and Mini Kosseel are often around, for some reason I forgot to make a post about it. So here it is ...




Design Goals from the Kossel page:

• Zero backlash.
• type: Delta printer
• Speed: 320 mm/s in all 3 directions.
• Resolution: 100 steps/mm in all 3 directions.
• Repeatability: better than 0.03 mm (30 micron)
• Build volume: cylindrical, 170mm diameter, 240mm height.
• Footprint: triangle, 300 mm width (240mm OpenBeam + printed corners).
• Frame height: 600 mm.
• Print surface: unheated round glass, doesn't move.
• Mass of end effector with hotend: less than 50 grams.
• Simplicity: fewer than 200 parts.
• Hardware cost: less than $600 USD.
• Fully automatic print surface level calibration (autoleveling).

https://github.com/jcrocholl/kossel

http://reprap.org/wiki/Kossel

http://deltabot.tumblr.com/

Build manual:

http://www.builda3dprinter.eu/build-manuals/kossel_mini/

Here is the demonstration of the autolevel feature:

http://diy3dprinting.blogspot.com/2013/05/automatic-bed-leveling-on-mini-kossel.html
http://diy3dprinting.blogspot.com/2013/06/mini-kossel-prints-on-unheated-glass.html

Read More